Since 1995Manufacturer & importer of voltage stabilizers and lithium cells. SCR & IGBT stabilizers: coming soon.See the range
Showroom: Abid Market, Lahore · Mon–Sat 10:30am–8:30pm
Lahore · Since 1995
Genuine CellsAboutBlogContact
🇬🇧EN
Home / Medical / Dental clinics
Dental clinics

Voltage stabilizer for dental clinics

A dental clinic runs motors, heaters and electronics on one supply — the chair, the compressor, the autoclave and the X-ray. One Voltec servo stabilizer on the clinic's main line keeps all of them on a steady 220V.

What we protect

Dental chairs and delivery units
Air compressors and suction
Autoclaves and sterilizers
Dental X-ray and OPG
Intraoral scanners, CAD/CAM and dental lasers

One clinic, many kinds of load

Compressors and suction motors pull a surge each time they start, the autoclave heater draws steadily, and the electronics in the chair and scanner want clean voltage. Sizing the stabilizer for the whole clinic — with room for the motor starts — protects everything at once.

The right setup

Sizing rule: the machine's rating in kVA (watts ÷ 0.8), plus everything else on the same supply, plus 25%. Send us the model and we size it for you.

10 kVA servo

One or two chairs

  • Chair, compressor, autoclave, lights
  • Input from 100V or 140V
See the model →
15–20 kVA servo

Clinic with OPG

  • Extra headroom for the X-ray
  • 20 kVA also in 3-phase
See the model →

Why clinics choose a Voltec servo motor stabilizer

Cuts HIGH voltage, not only lowWhen power returns after load-shedding the line can jump to 260–280V. A Voltec servo brings it back down to 220V — and cuts off above its limit — instead of only boosting low voltage.
Steady 220V ±1%A servo motor moves a carbon-brush slider across the autotransformer, so correction is smooth and stepless — no relay clicks, no stepped jumps reaching your machine.
Pure copper windingsCopper autotransformer and coils, no aluminium — they run cooler under the long, continuous load of a busy clinic day.
Works on weak lines too10 kVA units hold 220V from 100V or 140V input (you choose the range); our 30 kVA model starts working at 60V.
Protection built inHigh- and low-voltage cutoff, overload protection and a time-delay restart, so a surge when the grid comes back never reaches the machine.
VOLTEC — manufacturer and importerVOLTEC is a manufacturer and importer of voltage stabilizers. Every unit is tested before dispatch and serviced by our own team. 1-year warranty. Since 1995.
Trusted by labs and equipment importersChughtai Labs and medical equipment importers — the companies that sell and install clinic machines — buy VOLTEC stabilizers from us.

Need solid-state? IGBT and SCR on custom order. For the most sensitive electronics, or a load that needs the fastest possible correction, we supply solid-state stabilizers on custom order. Tell us the machine and we quote the specification, price and lead time in writing. IGBT & SCR custom order →

Questions we get

What size stabilizer for a dental clinic?
A clinic with one or two chairs, a compressor and an autoclave usually needs a 10 kVA servo stabilizer. Add an OPG or more chairs and 15–20 kVA is the right range. Send us your equipment list and we will size it.
Will it handle the compressor starting?
Yes — we size with headroom for motor starts. A servo stabilizer corrects smoothly and does not drop out when the compressor kicks in.
Does it protect against high voltage?
Yes. It brings high voltage back down to 220V and cuts off above its limit, as well as boosting low voltage.

Tell us the machine. We'll size the protection.

Send the model and your city on WhatsApp. Written recommendation and quote, 1-year warranty, nationwide delivery.

WhatsApp Voltec