Since 1995Manufacturer & importer of voltage stabilizers and lithium cells. SCR & IGBT stabilizers: coming soon.See the range
Showroom: Abid Market, Lahore · Mon–Sat 10:30am–8:30pm
Lahore · Since 1995
Genuine CellsAboutBlogContact
🇬🇧EN
Home / Medical / Laser machines
Aesthetic & dermatology lasers

Voltage stabilizer for laser machines

A laser machine costs lakhs and earns every day it runs. One voltage swing — low in the evening, a spike when power returns after load-shedding — can stop a session or damage its power boards. A Voltec servo motor stabilizer keeps it on a steady 220V.

What we protect

Diode hair-removal lasers
IPL / SHR platforms
Nd:YAG and Q-switched / picosecond tattoo lasers
Fractional CO₂ lasers
HIFU and RF aesthetic devices
Cryolipolysis and body-contouring machines

Why laser clinics lose machines to voltage

Most laser machines are imported and built for a clean, stable supply. In Pakistan the same clinic can see 170V at peak hours and 270V when the grid comes back. Low voltage makes the machine error out mid-session; high voltage is what burns power boards and cooling circuits. A stabilizer that only boosts low voltage leaves you exposed to the second problem.

The right setup

Sizing rule: the machine's rating in kVA (watts ÷ 0.8), plus everything else on the same supply, plus 25%. Send us the model and we size it for you.

10 kVA servo

One laser room

  • Our most-ordered size for laser rooms
  • One laser plus room AC and lights
  • Input from 100V or 140V — choose your range
See the model →
15–20 kVA servo

Two machines or a full clinic

  • Two lasers, or laser + AC + reception
  • Single-phase; 20 kVA also in 3-phase
See the model →
30 kVA (from 60V)

Very weak line

  • For areas where voltage drops below 100V
  • Single-phase, 100% pure copper
See the model →

Sell or import laser machines? Bundle protection with every machine you install — ask for our dealer rate on WhatsApp.

Why clinics choose a Voltec servo motor stabilizer

Cuts HIGH voltage, not only lowWhen power returns after load-shedding the line can jump to 260–280V. A Voltec servo brings it back down to 220V — and cuts off above its limit — instead of only boosting low voltage.
Steady 220V ±1%A servo motor moves a carbon-brush slider across the autotransformer, so correction is smooth and stepless — no relay clicks, no stepped jumps reaching your machine.
Pure copper windingsCopper autotransformer and coils, no aluminium — they run cooler under the long, continuous load of a busy clinic day.
Works on weak lines too10 kVA units hold 220V from 100V or 140V input (you choose the range); our 30 kVA model starts working at 60V.
Protection built inHigh- and low-voltage cutoff, overload protection and a time-delay restart, so a surge when the grid comes back never reaches the machine.
VOLTEC — manufacturer and importerVOLTEC is a manufacturer and importer of voltage stabilizers. Every unit is tested before dispatch and serviced by our own team. 1-year warranty. Since 1995.
Trusted by labs and equipment importersChughtai Labs and medical equipment importers — the companies that sell and install clinic machines — buy VOLTEC stabilizers from us.

Need solid-state? IGBT and SCR on custom order. For the most sensitive electronics, or a load that needs the fastest possible correction, we supply solid-state stabilizers on custom order. Tell us the machine and we quote the specification, price and lead time in writing. IGBT & SCR custom order →

Questions we get

What size stabilizer do I need for a laser machine?
Check the machine's nameplate for its power in kVA or watts (watts ÷ 0.8 gives kVA), add 25%, and add anything else on the same supply, such as the room AC. For a single laser room most clinics use a 10 kVA servo stabilizer. Send us the model and we will size it for you.
Is a servo stabilizer fast enough for a laser?
For the voltage swings a Pakistani clinic actually sees — slow sags in the evening and the jump when power returns — yes. A Voltec servo corrects at about 28–30 volts per second and holds 220V ±1%, and its cutoff disconnects the machine if voltage goes beyond the safe range. If your machine maker asks for solid-state protection, we supply IGBT and SCR stabilizers on custom order.
Does it protect against high voltage?
Yes. Voltec servo stabilizers bring high input — up to about 270–280V depending on the model — back down to 220V, and cut off above their limit. They do not only boost low voltage.
Are the windings copper?
Yes, copper windings and autotransformer. Our 30 kVA model is 100% pure copper with no aluminium.
What warranty do I get?
One year on all Voltec stabilizers, with service from our own team in Lahore.

Tell us the machine. We'll size the protection.

Send the model and your city on WhatsApp. Written recommendation and quote, 1-year warranty, nationwide delivery.

WhatsApp Voltec