Since 1995Manufacturer & importer of voltage stabilizers and lithium cells. SCR & IGBT stabilizers: coming soon.See the range
Showroom: Abid Market, Lahore · Mon–Sat 10:30am–8:30pm
Lahore · Since 1995
Genuine CellsAboutBlogContact
🇬🇧EN
Home / Medical / Ultrasound & X-ray
Diagnostic imaging

Stabilizer for ultrasound and X-ray machines

Ultrasound and X-ray machines are expensive to repair and slow to replace. A steady 220V supply protects their power supplies and keeps scans running through the evening sag and the surge after load-shedding.

What we protect

Ultrasound and colour Doppler machines
Digital / DR and CR X-ray systems
Dental X-ray and OPG units
ECG, patient monitors and workstations
Image printers and reporting PCs

What makes imaging rooms different

An ultrasound machine draws a modest, steady load and mainly needs clean, stable voltage. An X-ray generator is different: it pulls a large burst of current at the moment of exposure. The stabilizer and the wiring feeding it must be sized for that burst, not only for the machine's idle rating — so always tell us the generator's kW rating.

The right setup

Sizing rule: the machine's rating in kVA (watts ÷ 0.8), plus everything else on the same supply, plus 25%. Send us the model and we size it for you.

3–5 kVA servo

Ultrasound room

  • Ultrasound + monitor + printer
  • Smooth, stepless correction
See the model →
10–15 kVA servo

Clinic with X-ray

  • Sized for the X-ray exposure burst
  • Tell us the generator kW
See the model →
20 kVA to 50 kVA 3-phase

Diagnostic centre

  • Whole floor or several rooms
  • 3-phase SJW servo, per-phase correction
See the model →

CT and MRI scanners use power conditioning specified by the scanner maker. We will tell you that honestly rather than sell you the wrong unit.

Why clinics choose a Voltec servo motor stabilizer

Cuts HIGH voltage, not only lowWhen power returns after load-shedding the line can jump to 260–280V. A Voltec servo brings it back down to 220V — and cuts off above its limit — instead of only boosting low voltage.
Steady 220V ±1%A servo motor moves a carbon-brush slider across the autotransformer, so correction is smooth and stepless — no relay clicks, no stepped jumps reaching your machine.
Pure copper windingsCopper autotransformer and coils, no aluminium — they run cooler under the long, continuous load of a busy clinic day.
Works on weak lines too10 kVA units hold 220V from 100V or 140V input (you choose the range); our 30 kVA model starts working at 60V.
Protection built inHigh- and low-voltage cutoff, overload protection and a time-delay restart, so a surge when the grid comes back never reaches the machine.
VOLTEC — manufacturer and importerVOLTEC is a manufacturer and importer of voltage stabilizers. Every unit is tested before dispatch and serviced by our own team. 1-year warranty. Since 1995.
Trusted by labs and equipment importersChughtai Labs and medical equipment importers — the companies that sell and install clinic machines — buy VOLTEC stabilizers from us.

Need solid-state? IGBT and SCR on custom order. For the most sensitive electronics, or a load that needs the fastest possible correction, we supply solid-state stabilizers on custom order. Tell us the machine and we quote the specification, price and lead time in writing. IGBT & SCR custom order →

Questions we get

What size stabilizer for an ultrasound machine?
Most single ultrasound rooms run comfortably on a 3–5 kVA servo stabilizer, including the monitor and printer. Send us the model and we will confirm.
Can a stabilizer handle an X-ray machine?
Yes, if it is sized for the exposure. X-ray generators draw a large burst of current when they fire, so we size from the generator's kW rating, not the standby load. Send us the generator rating and we will recommend the size.
Do you protect CT or MRI?
No. Large CT and MRI systems use power conditioning specified by the scanner manufacturer. We protect ultrasound, X-ray, OPG and the other single-phase and smaller three-phase equipment in a diagnostic centre.
Does the stabilizer handle high voltage?
Yes. It brings high input back down to 220V and cuts off above its limit, as well as boosting low voltage.

Tell us the machine. We'll size the protection.

Send the model and your city on WhatsApp. Written recommendation and quote, 1-year warranty, nationwide delivery.

WhatsApp Voltec