Since 1995Manufacturer & importer of voltage stabilizers and lithium cells. SCR & IGBT stabilizers: coming soon.See the range
Showroom: Abid Market, Lahore · Mon–Sat 10:30am–8:30pm
Lahore · Since 1995
Genuine CellsAboutBlogContact
🇬🇧EN
Home / Medical / Labs & hospitals
Laboratories & hospitals

Voltage stabilizer for laboratories and hospitals

Lab analysers, centrifuges, incubators and lab refrigerators need a stable supply to give reliable results and to last. Voltec supplies single-phase servo stabilizers for single machines and 3-phase servo systems for whole floors and hospital wings.

What we protect

Chemistry, haematology and immunoassay analysers
Centrifuges, incubators and water baths
Lab and vaccine refrigerators
Hospital wards, OPD blocks and admin floors
Pharmacy cold storage

Bench machine or the whole building

A single analyser needs a small, clean single-phase supply. A hospital wing needs every phase corrected on its own, with phase-failure protection. Voltec covers both: single-phase servo stabilizers from 1 kVA, and 3-phase SJW servo stabilizers that correct each phase independently.

The right setup

Sizing rule: the machine's rating in kVA (watts ÷ 0.8), plus everything else on the same supply, plus 25%. Send us the model and we size it for you.

1–5 kVA servo

One analyser or bench

  • Analyser + PC + printer
  • Steady 220V ±1%
See the model →
10–20 kVA servo

Whole laboratory

  • All benches on one unit
  • Single-phase; 20 kVA also 3-phase
See the model →
50 kVA 3-phase SJW

Hospital wing or floor

  • Per-phase correction, phase-failure cutoff
  • Larger 3-phase units on order
See the model →

Hospital and government tenders: we provide quotations, specification sheets and documentation. See our industrial and tenders page.

Why clinics choose a Voltec servo motor stabilizer

Cuts HIGH voltage, not only lowWhen power returns after load-shedding the line can jump to 260–280V. A Voltec servo brings it back down to 220V — and cuts off above its limit — instead of only boosting low voltage.
Steady 220V ±1%A servo motor moves a carbon-brush slider across the autotransformer, so correction is smooth and stepless — no relay clicks, no stepped jumps reaching your machine.
Pure copper windingsCopper autotransformer and coils, no aluminium — they run cooler under the long, continuous load of a busy clinic day.
Works on weak lines too10 kVA units hold 220V from 100V or 140V input (you choose the range); our 30 kVA model starts working at 60V.
Protection built inHigh- and low-voltage cutoff, overload protection and a time-delay restart, so a surge when the grid comes back never reaches the machine.
VOLTEC — manufacturer and importerVOLTEC is a manufacturer and importer of voltage stabilizers. Every unit is tested before dispatch and serviced by our own team. 1-year warranty. Since 1995.
Trusted by labs and equipment importersChughtai Labs and medical equipment importers — the companies that sell and install clinic machines — buy VOLTEC stabilizers from us.

Need solid-state? IGBT and SCR on custom order. For the most sensitive electronics, or a load that needs the fastest possible correction, we supply solid-state stabilizers on custom order. Tell us the machine and we quote the specification, price and lead time in writing. IGBT & SCR custom order →

Questions we get

What stabilizer does a laboratory analyser need?
Most single analysers need 1–5 kVA. Check the nameplate rating, add the PC and printer, and add 25%. Send us the model and we will size it.
Do you supply 3-phase stabilizers for hospitals?
Yes. Our 3-phase SJW servo stabilizer corrects each phase separately and cuts off on phase failure. The 50 kVA is available, and larger 3-phase units are supplied on order.
Can you handle a hospital tender?
Yes. We provide written quotations, specification sheets and the documentation tenders ask for.

Tell us the machine. We'll size the protection.

Send the model and your city on WhatsApp. Written recommendation and quote, 1-year warranty, nationwide delivery.

WhatsApp Voltec